Basic formats plant layout shown, considering the criteria to be taken into account in each of the formats. 

Work sampling is a method of indirect measurement, which means instantaneous observations, to determine the amount of uptime or downtime in a production process.

The Cellular production consists on containing the components and machines in cells, combining the production for process with the online productión, to obtain the advantages  that offer both processes, in this case the company can offer variety of products and low costs.

Basic formats plant layout shown, considering the criteria to be taken into account in each of the formats. 

Work sampling is a method of indirect measurement, which means instantaneous observations, to determine the amount of uptime or downtime in a production process.

The Cellular production consists on containing the components and machines in cells, combining the production for process with the online productión, to obtain the advantages  that offer both processes, in this case the company can offer variety of products and low costs.

The location of an industrial plant, is the process of choosing a geographical location to perform the operations of a company. To determine the best location, you must perform an assessment of the factors affecting the selection. Two groups of factors are considered: Quantitative, which are easy to quantify and Qualitative that are less tangible, hard to quantify, evaluation of the latter depends on the judgment of the analyst, keeping a tinge of subjectivity, making no model used to ensure that the venue is optimal. To optimize the classification of factors, it is proposed to use the model of Analytic Hierarchy Process (AHP) with a proper rating scale, which ensures consistency of it and allows the use of a software (Expert Choice). This study presents and demonstrates the contribution of the Analytic Hierarchy Process (AHP) in the task of optimizing the location of an industrial plant...

La localización de una Planta Industrial, es el proceso de elegir un lugar geográfico para realizar las operaciones de una empresa. Para determinar la mejor localidad, es necesario realizar una evaluación de los factores que condicionan la selección. Se consideran dos grupos de factores: Cuantitativos, que son fáciles de cuantificar y Cualitativos, que son menos tangibles, difíciles de cuantificar, la evaluación de estos últimos depende de la apreciación del analista, manteniendo un tinte de subjetividad, lo que hace que ningún modelo utilizado garantice que el lugar elegido sea el óptimo. Para optimizar la calificación de los factores, se propone utilizar el modelo de PROCESO JERÁRQUICO ANALÍTICO (PJA), con una escala de calificación adecuada, que asegura la consistencia de la misma y permite la utilización de un software (Expert Choice). El presente estudio expone y dem...

En la localización de una planta industrial, se deben evaluar tanto factores cuantitativos como cualitativos, los primeros son fáciles de cuantificar, mientras que los segundos son menos tangibles, y que dependen de la apreciación del analista, por lo que el modelo a utilizar no garantiza que la localidad elegida sea la óptima. Siendo de suma importancia la selección de la localidad, ya que de ello depende el éxito o el fracaso de la empresa, es que se hace necesario utilizar un modelo que optimice dicha selección; para ello usaremos un modelo multicriterio, el Proceso Jerárquico Analítico, que cuenta con una adecuada escala de valoración y ponderación de factores, así como permite asegurar la consistencia de la calificación, también permite realizar un análisis de sensibilidad. La presente tesis expone y demuestra el aporte del Proceso Jerárquico Analítico (Analytical H...

This paper presents the results of research conducted by the authors on the subject and proposed the creation of an automated production lab with three distinct areas: Apparel, Footwear and CNC.

This paper presents a CAD / CAM system used in apparel garment, the advantages over the traditional system and the possibility of gradually implemented in the pilot plant confection of Fll - San Marcos.

This paper presents the results of research conducted by the authors on the subject and proposed the creation of an automated production lab with three distinct areas: Apparel, Footwear and CNC.

This paper presents a CAD / CAM system used in apparel garment, the advantages over the traditional system and the possibility of gradually implemented in the pilot plant confection of Fll - San Marcos.

The plant layout problem can be generalized as a case intensively studied combinatorial optimization and therefore its nature is a NP- hard. The core of the problem originally introduced as the Systematic Distribution Planning , a multi -criteria and relatively simple, has been extended to larger contexts , through the formulation as a mathematical model based on the nature of the workshops . Given the computational complexity of the calculations have been developed heuristics ,metaheuristics and others to obtain approximate solutions . The aim of this study is to analyze recent research on plant distribution problems within the industrial context by classifying and comparing the representation of the problem , solution methods , constraints and the objective function used . The report covers more than 30 peer-reviewed articles on the subject. Particular attention is placed on recent pub...

El problema de distribución de planta se puede generalizar como un caso de optimización combinatoria intensamente estudiado y por lo tanto su naturaleza es un NP-difícil. El núcleo del problema originalmente introducido como el Planeamiento Sistemático de la Distribución, un procedimiento multi-criterio y relativamente simple, se ha extendido a contextos mayores, pasando por la formulación como un modelo matemático según la naturaleza de los talleres de trabajo. Dada la complejidad computacional de los cálculos se han desarrollado heurísticas, metaheurísticas y otros para obtener soluciones aproximadas. El objetivo de éste estudio es analizar investigaciones recientes en los problemas de distribución de planta dentro del contexto industrial en orden de clasificar y comparar la representación del problema, métodos de solución, restricciones y la función objetivo usado. E...

This article focuses the next problem: How to formulate a realistic scenery to 2015 and at the same time be the base of a vision that can be carry out to the furniture cluster of Villa El Salvador?; in order to have results, we applied DELPHI and MINI DELPHI surveys as well the prospective strategic method, it involves the MIC MAC, MACTOR and SMIC methods; all the data was processes by shareware software of LIPSOR institute of France. The principal results were: the variables of the strategic axis, the actors role, the bets scenery to 2015 and a vision proposed to that year.

The rate of annual growth of energy comsumption in the world increases at a rate of 2 to 3%, having hydrocarbons and coal like its main components. In Peru the proven reserves of energy are: gas (Camisea) with 43% of the commercial energy, 23.1% of hydroenergy, natural gas liquids with 14.7% and others with 19,2%. The power trade balance in Peru is negative, petroleum production in the last years this descending whereas gas production and gas liquids are increasing. Camisea is the more important gas project of Peru, the construction of the liquefaction plant will be used for the export and the implementation of basic petrochemical industries. Gas will become important in the change of Peru's power matrix.

The industrial faculty posgrade unit of UNMSM (UPG) since 2007 had an accelerated growing in programs and students, in this scenario, the academic - management system was not enough to the higher education modern approach, generating the next question: What kind of quality management design is appropriate and how to must be implemented at the UPG taking as a base the ISO 9001 standard?. In order to answer this question, the work team applied concepts like continuously improvement and the process map analysis ; having as a result the validation of the System Management of Academic – Administrative Quality in two academic semesters.

This article focused the next problem: What elements does have a design of a module control in a retail?; to answer this question, proceeded to characterizing an identification system by Radio Frequency (RFID) to buying massive products organizations. The research only shows the design and the general benefits, any economic analyze or rate of return will depends of the enterprise where it applies.

This article focuses the next problem: How to formulate a realistic scenery to 2015 and at the same time be the base of a vision that can be carry out to the furniture cluster of Villa El Salvador?; in order to have results, we applied DELPHI and MINI DELPHI surveys as well the prospective strategic method, it involves the MIC MAC, MACTOR and SMIC methods; all the data was processes by shareware software of LIPSOR institute of France. The principal results were: the variables of the strategic axis, the actors role, the bets scenery to 2015 and a vision proposed to that year.