Mostrando 1 - 12 Resultados de 12 Para Buscar 'Rojas T, Justo', tiempo de consulta: 1.02s Limitar resultados
1
artículo
By simulation with the Molecular Dynamics method and the thermal temper technique, the more stablegeometric structures and their respective energy were determined in the Nin Alm (n + m = 13)nanoclusters. The atomic interaction in the cluster was modelized with the Embeded Atom Method (EAM)(the Voter & Chen version). The most stable geometric structures of the cluster and their minimal energywere obtained from 200 generating spatial coordinates along the high energy path. The initial internalenergy is higher than the melting temperature of the cluster. The thermal temper technique was neededto remove slowly the internal kinetic energy from the clusters. The more stable clusters have a regularicosahedral geometrical structure.
2
artículo
Using Monte Cario simulation have been carried out an.atomistic description of the structure and ordering processes in the system Cu - Au in a two-dimensional model. The ABV model of the alloy is a system of N atoms A and B, located in rigid lattice with sorne vacañt sites. In the model we assume pair wise interactions between nearest neighbors with constant ordering energy J,;, 0.03 eV. The dynarnics was introduced by means of a vacancy that exchanges of place with any atom of its neighbors . The simulations were carried out in a square lattice with 1024 and 4096 particles, using periodic boundary conditions to avoid border effects. We calculate the first two parameters of short range arder of Warren-Cowley as function of the concentration and tenl.petature. It was also studied the probabilities of formation of different atomic clusters that consist of 9 atoms as function of the concen...
3
artículo
Mediante la simulación con el método de Dinámica Molecular y la técnica del temple térmico se han determinado las estructuras geométricas más estables, y sus respectivas energías, de los nanoclusters de NinAlm (n + m = 13). La interacción entre los átomos del cluster se modela mediante el método del potencial del átomo insertado (EAM), en la versión de Voter y Chen. Las estructuras geométricas más estables de los clusters y sus energías mínimas fueron obtenidas a partir de 200 coordenadas del espacio de fases generadoras a lo largo de las trayectorias de altas energías. La energía interna inicial es superior a la temperatura de fusión de los clusters. Se utiliza la técnica del temple térmico con la finalidad de remover lentamente la energía cinética interna de los clusters. Los nanoclusters más estables poseen una estructura geométrica de icosaedro regular.
4
artículo
Using a time of flight technique, the maximal values of the kinetic energy as a function of the primary mass of fragments from low energy fission of 234U and 236U were measured by Signarbieux et al. From calculations of scission configurations, one can conclude that, for those two fissioning systems, the maximal values of the total kinetic energy corresponding to fragmentations (42Mo62, 50Sn80) and (42Mo64, 50Sn80) respectively, are equal to the available energy, and that their scission configurations are composed of a spherical heavy fragment and a prolate light fragment, both in their ground state.
5
artículo
We use the classical molecular dynamics method (MD) to obtain an atomistic description of the diffusion and the structure of liquid aluminum in a wide range of temperatures (900 K - 2600 K). These studies use two-body long range oscillatory potentials. The numeric resolution of the motion equations is carried out by means of the Verlet algorithm. The MD simulation has been performed on a system of 256 particles using that short range order remains up to high temperatures. The height and shape of peaks suffer significant changes with the temperature, which evidences the peculiarities of changes in the liquid structure. The correlation radius decreases from 0,9 nm to 0,4 nm in the range of temperatures studied. We found that the first coordination number changes approximately in the interval of 12 - 8..5. The results of the measurements of the selfdiffusion coefficient in aluminum, carried...
6
tesis de grado
En este trabajo de investigación se analizó la discriminación y la vulneración del derecho a la igualdad, que es un fenómeno social y es un tema de creciente interés no solo en nuestro entorno sino en todo el mundo, tanto por los hechos como por los acontecimientos que están cambiando el panorama social, político y económico. El objetivo principal de esta tesis es analizar si la discriminación influye en la vulneración del derecho a la igualdad en la legislación peruana (artículo 323 del Código Penal). A partir de una metodología básica y un enfoque cualitativo, se utilizaron las entrevistas como técnica e instrumento; la guía de entrevistas, la misma que se aplicó a los fiscales como abogados especialistas en la materia. En consecuencia, la discriminación influye en la vulneración del derecho a la igualdad que afecta la equidad del proceso y la equidad, que existen ...
7
tesis de maestría
La investigación se enmarca en el Objetivo de Desarrollo Sostenible N.º 16,y tuvo como finalidad analizar las medidas alternativas a la prisión en la rehabilitación de delincuentes no violentos en Lima, 2025. Se desarrolló con un enfoque cualitativo, de tipo básico, utilizando el diseño fenomenológico y el alcance explicativo. La recolección de datos se realizó mediante entrevistas semiestructuradas dirigidas a diez operadores del sistema judicial, seleccionados mediante muestreo no probabilístico por conveniencia. El análisis se efectuó con el software Atlas.ti, aplicando codificación temática y coeficientes de co-ocurrencia. Entre los códigos más relevantes se encuentran impacto rehabilitador (0.16), proporcionalidad de las medidas (0.16), reintegración social (0.14), desafíos en la supervisión (0.16), mecanismos de control (0.14) y percepción de justicia (0.12). L...
8
tesis de grado
En la actualidad, el gas natural es una de las fuentes de energía de mayor utilidad en muchos niveles de la actividad humana, por lo que ha sido necesario buscar nuevas tecnologías para su explotación, producción, almacenamiento, tratamiento y distribución; en tierra como en el océano. Por otro lado, debido a la alta demanda de energía a nivel mundial es que se ha propiciado la ejecución de diversos proyectos de inversión para el descubrimiento y explotación de nuevas reservas de petróleo y gas natural. En el ámbito nacional, la demanda de suministrar gas natural a muchos sectores económicos va en aumento, un ejemplo de ello es el propósito del siguiente proyecto, que se desarrolla en el sector inmobiliario, instalación de gas natural en edificios multifamiliares en la ciudad de Lima - Callao, siendo esta una oportunidad de mejorar el desarrollo de la sociedad, el trabajo ...
9
tesis de maestría
Este proyecto de investigación es de vital importancia ya que brinda una información detallada acerca de los beneficios de pruebas tan sencillas y comunes que son de fácil acceso dentro de los servicios de cirugía general en casi todos los establecimientos de salud de la ciudad. Esta investigación nos aporta un conocimiento importante sobre el valor científico que podemos obtener para que de esta manera el personal competente en el área de salud que a su vez está en constante roce con los individuos con diagnóstico confirmado de apendicitis aguda; puedan requerir estos exámenes e interpretarlos de la mejor manera posible y para que a su vez tengan una mayor seguridad en al momento de tomar decisiones y plantear de forma más estratégica y elaborada su trabajo. Este proyecto de investigación, nos permite tomar una mejora decisión en pacientes que presenten cuadros de apendici...
10
artículo
Molecular dynamics simulations with embedded-atom potential (EAM) have been performed to study the energetic and structural changes during the collision and coalescence of two Cun nanoparticles. We simulated collision of nanoparticles at several temperatures below the melting point and with different impact energy. Analyzing the potential energy change during the collision we identify three clearly defined stages. The pair correlation function and the pair analysis technique are used to reveal the structural changes in the collision process. The variation in the time of the population of different pairs has been quantified, being observed diverse structural transformations. During the collision of two equal icosahedral nanoparticles ( Cu55 ) has been observed different behavior of 1551 pairs depending on the impact velocity.
11
artículo
NCs have many unique behaviors that are not seen in volume level materials. The objective of the study is to know the effects of the transformation of phases with respect to the orientation and speed in the copper nanowire deformed by traction. Due to the need to better understand the deformation mechanisms through simulations and the molecular dynamics method with the potentials of the EAM type, we evaluate the phase transformation in the direct correlation between the stress-strain curve, and the percentage of the abundance of pairs. In the elastic region in a range of 60% to 80% of atoms they are forming FCC structures, about 10% to 20% the HCp structure, the formation of the BCC structure is minimal and the percentage of other formations are in a range of 20% to 40%, affected by speed and orientation as a result, the greatest modulus of elasticity is 100 GPa and yield strength of 9.0...
12
artículo
NCs have many unique behaviors that are not seen in volume level materials. The objective of the study is to know the effects of the transformation of phases with respect to the orientation and speed in the copper nanowire deformed by traction. Due to the need to better understand the deformation mechanisms through simulations and the molecular dynamics method with the potentials of the EAM type, we evaluate the phase transformation in the direct correlation between the stress-strain curve, and the percentage of the abundance of pairs. In the elastic region in a range of 60% to 80% of atoms they are forming FCC structures, about 10% to 20% the HCp structure, the formation of the BCC structure is minimal and the percentage of other formations are in a range of 20% to 40%, affected by speed and orientation as a result, the greatest modulus of elasticity is 100 GPa and yield strength of 9.0...