Modelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito.
Descripción del Articulo
The objective of the research work is the application of the Holmberg Mathematical Model to improve the linear advance of the development work of the San Benito S.R. mine. L., carrying out the evaluation of the unitary operation of drilling and blasting, in order to obtain good results in the linear...
| Autor: | |
|---|---|
| Formato: | tesis de grado |
| Fecha de Publicación: | 2023 |
| Institución: | Universidad Nacional de Trujillo |
| Repositorio: | UNITRU-Tesis |
| Lenguaje: | español |
| OAI Identifier: | oai:dspace.unitru.edu.pe:20.500.14414/16438 |
| Enlace del recurso: | https://hdl.handle.net/20.500.14414/16438 |
| Nivel de acceso: | acceso abierto |
| Materia: | Modelo matemático de Holmberg en el diseño de perforación y voladura de labores |
| id |
UNIT_dd7a498862d347614937c0759745b797 |
|---|---|
| oai_identifier_str |
oai:dspace.unitru.edu.pe:20.500.14414/16438 |
| network_acronym_str |
UNIT |
| network_name_str |
UNITRU-Tesis |
| repository_id_str |
4801 |
| dc.title.es_PE.fl_str_mv |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito. |
| title |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito. |
| spellingShingle |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito. Jara Ruiz, Fredy Modelo matemático de Holmberg en el diseño de perforación y voladura de labores |
| title_short |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito. |
| title_full |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito. |
| title_fullStr |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito. |
| title_full_unstemmed |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito. |
| title_sort |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito. |
| author |
Jara Ruiz, Fredy |
| author_facet |
Jara Ruiz, Fredy |
| author_role |
author |
| dc.contributor.advisor.fl_str_mv |
Prado Palomino, Pedro Crisólogo |
| dc.contributor.author.fl_str_mv |
Jara Ruiz, Fredy |
| dc.subject.es_PE.fl_str_mv |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores |
| topic |
Modelo matemático de Holmberg en el diseño de perforación y voladura de labores |
| description |
The objective of the research work is the application of the Holmberg Mathematical Model to improve the linear advance of the development work of the San Benito S.R. mine. L., carrying out the evaluation of the unitary operation of drilling and blasting, in order to obtain good results in the linear advance. To meet the aforementioned objective, it was necessary to carry out field work. The first stage of the study is oriented to the execution of basic investigations, in order to obtain the necessary information, which will allow to evaluate the main factors of the control of drilling and blasting and to estimate the technical parameters applied to the design of drilling and blasting. In a second stage, the information obtained during the basic investigations will be integrated, in order to evaluate the drilling and blasting conditions, applying the Holmberg Mathematical Model. Through the application of the Holmberg Mathematical Model, the drilling and blasting mesh was improved in the development work of the San Benito S.R.L. mine, obtaining the following results, which are detailed below: Regular rock type: III A, RMR: 41 – 60, blasting efficiency is 95%, dip angle is 75º, advance per shot: 1.6 m., rod length: 6 feet and number of holes: 25. |
| publishDate |
2023 |
| dc.date.accessioned.none.fl_str_mv |
2023-04-04T16:24:43Z |
| dc.date.available.none.fl_str_mv |
2023-04-04T16:24:43Z |
| dc.date.issued.fl_str_mv |
2023-04 |
| dc.type.es_PE.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
| format |
bachelorThesis |
| dc.identifier.uri.none.fl_str_mv |
https://hdl.handle.net/20.500.14414/16438 |
| url |
https://hdl.handle.net/20.500.14414/16438 |
| dc.language.iso.es_PE.fl_str_mv |
spa |
| language |
spa |
| dc.relation.ispartof.fl_str_mv |
SUNEDU |
| dc.relation.ispartofseries.none.fl_str_mv |
Tmin; |
| dc.rights.es_PE.fl_str_mv |
info:eu-repo/semantics/openAccess |
| eu_rights_str_mv |
openAccess |
| dc.publisher.es_PE.fl_str_mv |
Universidad Nacional de Trujillo |
| dc.source.es_PE.fl_str_mv |
Universidad Nacional de Trujillo |
| dc.source.none.fl_str_mv |
reponame:UNITRU-Tesis instname:Universidad Nacional de Trujillo instacron:UNITRU |
| instname_str |
Universidad Nacional de Trujillo |
| instacron_str |
UNITRU |
| institution |
UNITRU |
| reponame_str |
UNITRU-Tesis |
| collection |
UNITRU-Tesis |
| bitstream.url.fl_str_mv |
https://dspace.unitru.edu.pe/bitstreams/3141e2f7-5cd4-4d4e-ae85-ac34f207dbcf/download https://dspace.unitru.edu.pe/bitstreams/221ff032-92f0-4d9c-ae26-6acb60bb5c11/download |
| bitstream.checksum.fl_str_mv |
8abfa1c02e7aee6f9cb1ac5c24deaf31 8a4605be74aa9ea9d79846c1fba20a33 |
| bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
| repository.name.fl_str_mv |
Repositorio Institucional - UNITRU |
| repository.mail.fl_str_mv |
repositorios@unitru.edu.pe |
| _version_ |
1807289791031541760 |
| spelling |
Prado Palomino, Pedro CrisólogoJara Ruiz, Fredy2023-04-04T16:24:43Z2023-04-04T16:24:43Z2023-04https://hdl.handle.net/20.500.14414/16438The objective of the research work is the application of the Holmberg Mathematical Model to improve the linear advance of the development work of the San Benito S.R. mine. L., carrying out the evaluation of the unitary operation of drilling and blasting, in order to obtain good results in the linear advance. To meet the aforementioned objective, it was necessary to carry out field work. The first stage of the study is oriented to the execution of basic investigations, in order to obtain the necessary information, which will allow to evaluate the main factors of the control of drilling and blasting and to estimate the technical parameters applied to the design of drilling and blasting. In a second stage, the information obtained during the basic investigations will be integrated, in order to evaluate the drilling and blasting conditions, applying the Holmberg Mathematical Model. Through the application of the Holmberg Mathematical Model, the drilling and blasting mesh was improved in the development work of the San Benito S.R.L. mine, obtaining the following results, which are detailed below: Regular rock type: III A, RMR: 41 – 60, blasting efficiency is 95%, dip angle is 75º, advance per shot: 1.6 m., rod length: 6 feet and number of holes: 25.El trabajo de investigación tiene como objetivo la aplicación del Modelo Matemático de Holmberg para mejorar el avance lineal de las labores de desarrollo de la mina San Benito S.R. L., realizando la evaluación de la operación unitaria de perforación y voladura, con la finalidad de obtener buenos resultados en el avance lineal. Para cumplir con el objetivo mencionado, fue necesario realizar trabajos de campo. La primera etapa del estudio está orientado a la ejecución de investigaciones básicas, con el fin de obtener la información necesaria, que permitirá evaluar los factores principales del control de la perforación y voladura y estimar los parámetros técnicos aplicados al diseño de la perforación y voladura. En una segunda etapa, se integrará la información obtenida durante las investigaciones básicas, con el fin de evaluar las condiciones de perforación y voladura, aplicando el Modelo Matemático de Holmberg. Mediante la aplicación del Modelo Matemático de Holmberg, se llegó a mejorar la malla de perforación y voladura en las labores de desarrollo de la mina San Benito S.R.L., obteniéndose los siguientes resultados, que se detallan a continuación: Tipo de roca regular: III A, RMR: 41 – 60, la Eficiencia de voladura es 95 %, el ángulo de buzamiento es 75º, avance por disparo: 1.6 m., longitud de barra: 6 pies y N.º de taladros: 25.TesisspaUniversidad Nacional de TrujilloTmin;SUNEDUinfo:eu-repo/semantics/openAccessUniversidad Nacional de Trujilloreponame:UNITRU-Tesisinstname:Universidad Nacional de Trujilloinstacron:UNITRUModelo matemático de Holmberg en el diseño de perforación y voladura de laboresModelo matemático de Holmberg en el diseño de perforación y voladura de labores de desarrollo en la mina San Benito.info:eu-repo/semantics/bachelorThesisTítulo ProfesionalIngeniero de MinasIngenieríaUniversidad Nacional de Trujillo. Facultad de IngenieríaORIGINALJara Ruiz.pdfJara Ruiz.pdfModelo matemático de Holmberg en el diseño de perforación y voladura de laboresapplication/pdf5586345https://dspace.unitru.edu.pe/bitstreams/3141e2f7-5cd4-4d4e-ae85-ac34f207dbcf/download8abfa1c02e7aee6f9cb1ac5c24deaf31MD51LICENSElicense.txtlicense.txttext/plain; charset=utf-81748https://dspace.unitru.edu.pe/bitstreams/221ff032-92f0-4d9c-ae26-6acb60bb5c11/download8a4605be74aa9ea9d79846c1fba20a33MD5220.500.14414/16438oai:dspace.unitru.edu.pe:20.500.14414/164382023-04-04 11:24:43.075open.accesshttps://dspace.unitru.edu.peRepositorio Institucional - UNITRUrepositorios@unitru.edu.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 |
| score |
13.9647665 |
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).