Diseño, construcción e instalación de un equipo para el estudio del control automático del nivel de líquido en dos tanques

• Autores: Honorio Rengifo, José Genaro, Molina Montes, Jhonatan Dejesús
• Formato: tesis de grado
• Fecha de Publicación: 2023
• Institución: Universidad Nacional De La Amazonía Peruana
• Repositorio: UNAPIquitos-Institucional
• Lenguaje: español
• OAI Identifier: oai:repositorio.unapiquitos.edu.pe:20.500.12737/9851
• Enlace del recurso: https://hdl.handle.net/20.500.12737/9851
• Nivel de acceso: acceso abierto
• Materia: Control automático; Controladores programables; Lenguajes de programación; Nivel de agua; Tanques; https://purl.org/pe-repo/ocde/ford#2.02.03

The general objective of the present investigation was: being designed for, constructing and installing an equipment to accomplish the study of the automatic control of the level of liquid in two tanks adequately, for which it became elaborate firstly a sketch of the aforementioned team with the aim of analyzing the functioning of every one of their main components, which were: a PLC, an electric pump, two solenoid valves, an elevated tank, a tank that represented a powerhouse of liquid, a tank cistern, two breakers with float and an interface of communication. Straightaway, was used the software Zelio Soft V5.4.2, in order to elaborate and to play-act the best-suited logic circuit for the automatic control of the level of liquid in two tanks. The aforementioned logic circuit, it has served to determine the quantity of physical receipts and expenditures used in the PLC, the same ones that worked out: five (5) inputs and four physical exits (4). The connection order for the inputs and physical exits was the following: push-buttons I1 (NC), I2 (NA) and I5 (NA), they connected to the inputs (1, 2 and 5) of the PLC, respectively; the breakers with float I3 and I4, they connected to the inputs 3 and 4 of the PLC, respectively; the physical exits Q1 and Q3 of the PLC, they connect simultaneously to the electric pump; and the physical exits Q2 and Q4 and of the PLC, they connected to the solenoid valves 1 and 2, respectively.