Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areas

Descripción del Articulo

The present work deals with the design, construction and characterization of a 500 W wind turbine prototype, using national technology. It includes the design and manufacture of each of the components of the wind turbine system - permanent magnet generator, wind rotor and steering elements; as well...

Descripción completa

Detalles Bibliográficos
Autores: González Chávez, Salomé, Baldera Teodoro, José Chiroque
Formato: artículo
Fecha de Publicación:2006
Institución:Universidad Nacional de Ingeniería
Repositorio:Revistas - Universidad Nacional de Ingeniería
Lenguaje:español
OAI Identifier:oai:oai:revistas.uni.edu.pe:article/394
Enlace del recurso:https://revistas.uni.edu.pe/index.php/tecnia/article/view/394
Nivel de acceso:acceso abierto
Materia:aerogenerador
iman permanente
zona rural
socioeconómico
energía limpia
wind turbine
permanent magnet
rural zone
socioeconomic
clean energy
id REVUNI_4cd43e255e06432f1f71dc72c88b6ed5
oai_identifier_str oai:oai:revistas.uni.edu.pe:article/394
network_acronym_str REVUNI
network_name_str Revistas - Universidad Nacional de Ingeniería
repository_id_str
spelling Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areasDiseño y construcción de un aerogenerador de 500 W con imanes permanentes para pequeñas demandas eléctricas de zonas ruralesGonzález Chávez, SaloméBaldera Teodoro, José Chiroqueaerogeneradoriman permanentezona ruralsocioeconómicoenergía limpiawind turbinepermanent magnetrural zonesocioeconomicclean energyThe present work deals with the design, construction and characterization of a 500 W wind turbine prototype, using national technology. It includes the design and manufacture of each of the components of the wind turbine system - permanent magnet generator, wind rotor and steering elements; as well as the field evaluation to determine its performance. Its application is presented as an energy and socioeconomic solution for rural areas that have wind resources, thus contributing to the improvement of living conditions under the principle of taking advantage of local resources and preserving the environment. As results of the field tests we have the verification of the design conditions as well as its operation according to the wind resource. Although the system was dimensioned to reach a nominal power of 500 W at a wind speed of 8 m/s, in the field this power has been obtained at a wind speed of 8.3 m/s, and a stable behavior in the other conditions.El presente trabajo trata del diseño, construcción y caracterización de un prototipo de aerogeneración de 500 W, utilizando tecnología nacional. Comprende el diseño y fabricación de cada uno de los componentes del sistema aerogenerador - generador de imanes permanentes, rotor eólico y elementos de dirección; así como la evaluación en campo para determinar su performance. Su aplicación se presenta como una solución energética y socioeconómica de las zonas rurales que poseen el recurso eólico, contribuyendo así a la mejora de las condiciones de vida bajo el principio de aprovechamiento del recurso local y la preservación del medio ambiente. Como resultados de las pruebas de campo se tiene, la verificación de las condiciones de diseño así como su operación de acuerdo al recurso eólico. Si bien el sistema fue dimensionado para alcanzar una potencia nominal de 500 W a una velocidad de viento de 8 m/s, en campo se ha obtenido dicha potencia a una velocidad de viento de 8,3 m/s, y un comportamiento estable en las demás condiciones.Universidad Nacional de Ingeniería2006-12-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionArtículo evaluado por paresapplication/pdfhttps://revistas.uni.edu.pe/index.php/tecnia/article/view/39410.21754/tecnia.v16i2.394TECNIA; Vol. 16 No. 2 (2006); 69-76TECNIA; Vol. 16 Núm. 2 (2006); 69-762309-04130375-7765reponame:Revistas - Universidad Nacional de Ingenieríainstname:Universidad Nacional de Ingenieríainstacron:UNIspahttps://revistas.uni.edu.pe/index.php/tecnia/article/view/394/386Derechos de autor 2006 TECNIAhttp://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessoai:oai:revistas.uni.edu.pe:article/3942023-12-05T14:55:59Z
dc.title.none.fl_str_mv Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areas
Diseño y construcción de un aerogenerador de 500 W con imanes permanentes para pequeñas demandas eléctricas de zonas rurales
title Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areas
spellingShingle Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areas
González Chávez, Salomé
aerogenerador
iman permanente
zona rural
socioeconómico
energía limpia
wind turbine
permanent magnet
rural zone
socioeconomic
clean energy
title_short Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areas
title_full Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areas
title_fullStr Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areas
title_full_unstemmed Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areas
title_sort Design and construction of a 500 W wind turbine with permanent magnets for small electrical demands in rural areas
dc.creator.none.fl_str_mv González Chávez, Salomé
Baldera Teodoro, José Chiroque
author González Chávez, Salomé
author_facet González Chávez, Salomé
Baldera Teodoro, José Chiroque
author_role author
author2 Baldera Teodoro, José Chiroque
author2_role author
dc.subject.none.fl_str_mv aerogenerador
iman permanente
zona rural
socioeconómico
energía limpia
wind turbine
permanent magnet
rural zone
socioeconomic
clean energy
topic aerogenerador
iman permanente
zona rural
socioeconómico
energía limpia
wind turbine
permanent magnet
rural zone
socioeconomic
clean energy
description The present work deals with the design, construction and characterization of a 500 W wind turbine prototype, using national technology. It includes the design and manufacture of each of the components of the wind turbine system - permanent magnet generator, wind rotor and steering elements; as well as the field evaluation to determine its performance. Its application is presented as an energy and socioeconomic solution for rural areas that have wind resources, thus contributing to the improvement of living conditions under the principle of taking advantage of local resources and preserving the environment. As results of the field tests we have the verification of the design conditions as well as its operation according to the wind resource. Although the system was dimensioned to reach a nominal power of 500 W at a wind speed of 8 m/s, in the field this power has been obtained at a wind speed of 8.3 m/s, and a stable behavior in the other conditions.
publishDate 2006
dc.date.none.fl_str_mv 2006-12-01
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Artículo evaluado por pares
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv https://revistas.uni.edu.pe/index.php/tecnia/article/view/394
10.21754/tecnia.v16i2.394
url https://revistas.uni.edu.pe/index.php/tecnia/article/view/394
identifier_str_mv 10.21754/tecnia.v16i2.394
dc.language.none.fl_str_mv spa
language spa
dc.relation.none.fl_str_mv https://revistas.uni.edu.pe/index.php/tecnia/article/view/394/386
dc.rights.none.fl_str_mv Derechos de autor 2006 TECNIA
http://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Derechos de autor 2006 TECNIA
http://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidad Nacional de Ingeniería
publisher.none.fl_str_mv Universidad Nacional de Ingeniería
dc.source.none.fl_str_mv TECNIA; Vol. 16 No. 2 (2006); 69-76
TECNIA; Vol. 16 Núm. 2 (2006); 69-76
2309-0413
0375-7765
reponame:Revistas - Universidad Nacional de Ingeniería
instname:Universidad Nacional de Ingeniería
instacron:UNI
instname_str Universidad Nacional de Ingeniería
instacron_str UNI
institution UNI
reponame_str Revistas - Universidad Nacional de Ingeniería
collection Revistas - Universidad Nacional de Ingeniería
repository.name.fl_str_mv
repository.mail.fl_str_mv
_version_ 1833562777301549056
score 13.941906
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).