Highly porous tungsten-oxide-based films obtained by spray-gel for gas sensing applications

Descripción del Articulo

Highly porous mixed WO3–SnO2 films have been prepared from an aqueous solution of SnCl4.5H2O and polytungsten gel with a molar ratio of Sn/W from 0 to 1. These solutions were sprayed on to alumina substrates at 220 ºC. The obtained films were annealing at 600 ºC in air for 3 h. The annealed films we...

Descripción completa

Detalles Bibliográficos
Autores: Solís, José, Rodríguez, Juan, Estrada, Walter
Formato: artículo
Fecha de Publicación:2005
Institución:Instituto Peruano de Energía Nuclear
Repositorio:IPEN-Institucional
Lenguaje:inglés
OAI Identifier:oai:repositorio.ipen.gob.pe:20.500.13054/407
Enlace del recurso:https://hdl.handle.net/20.500.13054/407
Nivel de acceso:acceso abierto
Materia:Óxidos de volframio
Estructura cristalina
Difracción de rayos X
Proceso de sol-gel
Películas
Substratos
Descripción
Sumario:Highly porous mixed WO3–SnO2 films have been prepared from an aqueous solution of SnCl4.5H2O and polytungsten gel with a molar ratio of Sn/W from 0 to 1. These solutions were sprayed on to alumina substrates at 220 ºC. The obtained films were annealing at 600 ºC in air for 3 h. The annealed films were composed of a mixture of WO3 and SnO2 phases. The gas sensitivity to butanol and ethanol vapors is enhanced when the Sn/W molar ratio increases in the film by up to 0.1, with further increments to this proportion the sensitivity decreases.
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).