For all the phenomenon is known faith and corrosion effects which arise which are evident in the deterioration of materials, equipment, etc.. This phenomenon is present in all branches of industry, transport and construction. 

A hydraulic system project includes the design, materials selection and construction of the hydraulic piston, hydraulic circuit and the joint with the pump and its accesories. This equiment will be driven by the force of moving fluid, whose application is in the devices of machines, tools, printing, perforation, packing and others.

Ultrasound is used for the non-destructive testing of materials. It is applied to know the inner of a material or components when processing the trajectory of the propagation of sound waves. It is know that propagation of waves inside the piece depends on the discotinuities of the material examined, which allows to evaluate the discontinuity about its form, size, direction, since these offer a resistance known as acoustic impedance. When knowing the propagation of the sound waves, its speed and therefore the property of materials are determined.

The sonorus pollution produced by the noise of vehicles is the factor that more annoyances causes to the urban population, the in habitants of Lima are exposed to this problem, it implies to know the problematic of the noise and it demands an enormous effort, being difficult to include all the city, for that reason it's focused on zones, choosing Javier Prado avenue by the East and the Brazil avenue by the West, making surveys to the passers-by and conductors in the rush hour 07:00 - 09:00 and 15:00 - 19:00 hours in the dense area of congestion to vehicular, to mitigate requires a good urban planning, optimal environmental desing of ways and with the suitable use of the ground will get a minimum impact of the noise.

This article shows the pratical application of production methods that have been used in our laboratories for machines 

The treatment of metals and alloys is a complex technological process comprising the steps of heating, holding and cooling in the process the complete transformation of structural phases, followed by a velicidad adequate cooling is achieved, which are modified sis properties which depend on the nature, size and distribution of the structural constituents that are related to the yield strength, breaking strength, elongation and energy absorption.

The hardness test is, together with the administration of one of the most used in the selection and quality control of materials ...

For all the phenomenon is known faith and corrosion effects which arise which are evident in the deterioration of materials, equipment, etc.. This phenomenon is present in all branches of industry, transport and construction. 

El proyecto de un sistema hidráulico, comprende el diseño, selección de materiales y construcción del pistón hidráulico, circuito hidráulico y el ensamble con la bomba y accesorios, este equipo será accionado por la fuerza de un fluido en movimiento, cuya aplicación es en los dispositivos de máquinas herramientas, estampado, perforación, empaques y otras.

Ultrasound is used for the non-destructive testing of materials. It is applied to know the inner of a material or components when processing the trajectory of the propagation of sound waves. It is know that propagation of waves inside the piece depends on the discotinuities of the material examined, which allows to evaluate the discontinuity about its form, size, direction, since these offer a resistance known as acoustic impedance. When knowing the propagation of the sound waves, its speed and therefore the property of materials are determined.

The sonorus pollution produced by the noise of vehicles is the factor that more annoyances causes to the urban population, the in habitants of Lima are exposed to this problem, it implies to know the problematic of the noise and it demands an enormous effort, being difficult to include all the city, for that reason it's focused on zones, choosing Javier Prado avenue by the East and the Brazil avenue by the West, making surveys to the passers-by and conductors in the rush hour 07:00 - 09:00 and 15:00 - 19:00 hours in the dense area of congestion to vehicular, to mitigate requires a good urban planning, optimal environmental desing of ways and with the suitable use of the ground will get a minimum impact of the noise.

This article shows the pratical application of production methods that have been used in our laboratories for machines 

The treatment of metals and alloys is a complex technological process comprising the steps of heating, holding and cooling in the process the complete transformation of structural phases, followed by a velicidad adequate cooling is achieved, which are modified sis properties which depend on the nature, size and distribution of the structural constituents that are related to the yield strength, breaking strength, elongation and energy absorption.

The hardness test is, together with the administration of one of the most used in the selection and quality control of materials ...

The drawing process is part of the metal mechanical production methods, for that reason this article shows in detail the variables to be taken into account for proper application. 

The drawing process is part of the metal mechanical production methods, for that reason this article shows in detail the variables to be taken into account for proper application. 

El documento digital no refiere asesor

Reverse logistic is a recently concept that has been taking more importance, force and interest by enterprises, governments and civil society, because currently we are living a peach of environment conservation and reducing of global warming. In the production phase, this concept is linked with mistakes and leftovers made in the fabrication process whose materials are possible of reuse. Thus, the application of reverse logistic is made by medium and large production enterprises, focused in manufacture, that are looking for reduce of costs and give a responsibility environmental image. In addition, enterprises need automated tools for taking good decisions when appear a mistake in the process production, which is the objective of this research. Finally, this system improves the results in the time, when it adds more data.

The Prim's algorithm, extracted from the graph theory, is easily adaptable for generating random mazes in the game development process. This study provides the theoretical framework of the algorithm, its adaptation to generate two-dimensional arrays of values, coding in Java and use of libraries provided by this programming language. It restricts the creation of the arrays to a minimum size of 11x11 to ensure that generates coherent sizes mazes and its application is for generating orthogonal called labyrinths (2D view). Finally, the measurement is made of the performance of the proposed encoding and concludes that in all tests, the average response time is less than a tenth of a second to generate maps of labyrinths.

Distribution centers are quite sensitive areas to produce failures due to human mistakes through the picking process. As a result, it impacts enormously the level of service and organization’s goals. The object of study is a drugstore whose number of orders is very high and the number of handled products too. Solution is given as a tool that applies Business Process Management (BPM) and provides characterization of organizational processes, the current picking process diagram (AS-IS) and the improved diagram (TO-BE) which enhances the process adding a new control point. Besides, in this paper BPMN notation was applied correctly in each diagram.