In the last century, public policy around the globe was mainly focused on economic growth leaving out of this perspective, social concerns and the environment detriment that this merely economic approach was causing. It was until the last quarter of the 20th century that people started to be aware of the growing poverty and of the jeopardy of the planet as a result of human being activities. In consequence, the concept of sustainable development emerged in the United Nations as a call to all countries to integrate economic growth with social needs and environmental protection, in such a way that our activities as earth inhabitants stopped compromising the quality of life and needs satisfaction of future generations.More recently, in 2016, effective 17 sustainable development goals established within the United Nations came officially. The embracement of these goals implies the design and...

In this work, well-designed zinc oxide-reduced graphene oxide (ZnO-rGO) nanorods (NRs) were synthesized by a hydrothermal method using electrospun ZnO-rGO seed layers. The ZnO-rGO seed layers were fabricated on fluorine-doped tin oxide (FTO) glass substrates through calcined of electrospun nanofibers at 400◦C in the air for 1 h. The nanofibers were prepared by electrospinning different spinning voltages and a spinning solution containing zinc acetate, polyvinyl pyrrolidone, and 0.2 wt% rGO. From a detailed characterization using various analytical techniques, for instance, X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), Raman spectroscopy, photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS), the dependence of the structure, morphology, and optical properties of the ZnO-rGO NRs was demonstrated. The photocatalytic activities of ZnO-rGO nanorods...

TiO2 nanotubes were synthesized by alkaline hydrothermal treatment of TiO2 nanoparticles with a controlled proportion of anatase and rutile. Tailoring of TiO2 phases was achieved by adjusting the pH and type of acid used in the hydrolysis of titanium isopropoxide (first step in the sol-gel synthesis). The anatase proportion in the precursor nanoparticles was in the 3–100% range. Tube-like nanostructures were obtained with an anatase percentage of 18 or higher while flake-like shapes were obtained when rutile was dominant in the seed. After annealing at 400°C for 2 h, a fraction of nanotubes was conserved in all the samples but, depending on the anatase/rutile ratio in the starting material, spherical and rod-shaped structures were also observed.

ZnO nanorods (NRs) films, nitrogen-doped (ZnO:N), and ZnO doped with nitrogen and decorated with silver nanostructures (ZnO:N-Ag) NRs films were vertically supported on undoped and N doped ZnO seed layers by a wet chemical method. The obtained films were characterized structurally by X-ray diffraction. Morphological and elemental analysis was performed by scanning electron microscopy, including an energy dispersive X-ray spectroscopy facility and their optical properties by Ultraviolet-Visible Spectroscopy. Analysis performed in the NRs films showed that the nitrogen content in the seed layer strongly affected their structure and morphology. The mean diameter of ZnO NRs ranged from 70 to 190 nm. As the nitrogen content in the seed layer increased, the mean diameter of ZnO:N NRs increased from132 to 250 nm and the diameter dispersion decreased. This diameter increase occurs simultaneously...

In this work, a SiO2-TiO2 coating, composed of different numbers of TiO2 and SiO2 layers, was fabricated by a spray-coating technique. The films were deposited onto ignimbrite rock and divided into two groups according to the number of SiO2 layers applied, 10 and 15 layers of SiO2 and 5 layers of TiO2 for each group. The morphology and chemical composition of the synthesized samples were characterized by field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectrometer (EDS), which reveal the successful SiO2-TiO2 coating on ignimbrite. The photocatalytic activities of samples obtained were evaluated toward the decomposition of 3 ppm of methyl orange (MO). Finally, NOx gas degradation was studied. The obtained results evidenced that the SiO2 and TiO2 coating improved the photocatalytic activity of ignimbrite. © 2020 Daily Maria Magdalena Gallegos Florez et al.