The fabrication of ultra-sharp tips from carbon fiber (CF), which are mounted on a qPlus probe for combined dynamic scanning tunneling microscopy (STM) and frequency modulation atomic force microscopy (FM-AFM) experiments, is reported. The carbon fiber tips were electrochemically etched in a KOH or NaOH solution, using different electronic devices. CF tips with an apex radius ∼10 nm, as deduced from the measured slopes of the Fowler–Nordheim plots (kR < 70 nm for k ∼ 6), were routinely obtained with a homemade electronic device that controls the intensity of the etching current. Then, these conductive CF tips were also characterized by imaging the 6H-SiC(0 0 0 1) surface covered by an epitaxial graphene layer in ultra-high vacuum (UHV). The lattice of the R30° reconstruction was regularly imaged by STM working either in non-oscillating mode or in dynamic mode, which also maps the ...