Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy

Descripción del Articulo

The amount of dust deposited on the surface of a panel depends on the environmental parameters. These are random (eg. humidity, wind speed and ambient temperature) which makes it difficult to model them theoretically. This paper describes the effect of dust by calculating the derating factor (η_polv...

Descripción completa

Detalles Bibliográficos
Autores: Angulo Abanto, José Rubén, Calsi Silva, Brando Xavier, Alfaro Collazos, Erick Felipe, Conde Mendoza, Luis Ángel, Muñoz Cerón, Emilio, Grieseler, Rolf, Guerra Torres, Jorge Andrés, Palomino Töfflinger, Jan Amaru, Espinoza Paredes, Rafael Leonardo, De la Casa Higueras, Juan
Formato: artículo
Fecha de Publicación:2020
Institución:Universidad Nacional de Ingeniería
Repositorio:Revistas - Universidad Nacional de Ingeniería
Lenguaje:español
OAI Identifier:oai:oai:revistas.uni.edu.pe:article/832
Enlace del recurso:https://revistas.uni.edu.pe/index.php/tecnia/article/view/832
Nivel de acceso:acceso abierto
Materia:Sistema Fotovoltaicos
Deposición del polvo
Factor de Reducción
Photovoltaic System
Dust deposition
Reduction Factor
id REVUNI_bc03dd88041502ddd2801d6741996294
oai_identifier_str oai:oai:revistas.uni.edu.pe:article/832
network_acronym_str REVUNI
network_name_str Revistas - Universidad Nacional de Ingeniería
repository_id_str
spelling Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar EnergyEstudio del efecto del polvo y estimación de la potencia nominal en un string fotovoltaico: Colaboración con el XXIII Simposio Peruano de Energía SolarAngulo Abanto, José RubénCalsi Silva, Brando XavierAlfaro Collazos, Erick FelipeConde Mendoza, Luis ÁngelMuñoz Cerón, EmilioGrieseler, RolfGuerra Torres, Jorge AndrésPalomino Töfflinger, Jan AmaruEspinoza Paredes, Rafael LeonardoDe la Casa Higueras, JuanSistema FotovoltaicosDeposición del polvoFactor de ReducciónPhotovoltaic SystemDust depositionReduction FactorThe amount of dust deposited on the surface of a panel depends on the environmental parameters. These are random (eg. humidity, wind speed and ambient temperature) which makes it difficult to model them theoretically. This paper describes the effect of dust by calculating the derating factor (η_polvo) and modeling its dependence over time. To achieve this, an experimental campaign was carried out in three tandem (a-Si / µc-Si) of 1.15 kW controlled in the city of Lima, divided into two periods of time. In the first period, from 07.15.2016 to 04.07.2017, the three strings were cleaned twice per week. The nominal power was calculated for days with clear skies conditions. It was found that between each string there are slight differences or mismatches in the nominal power, which is considered to estimate a correction factor (k) in order to readjust the output power. In the second stage from 05.07.2017 to 05.07.2018, the powder was allowed to deposit naturally, studying the effect of the dust on the energy fall through the reduction factor. Understanding this factor will be of importance for the maintenance operations of the ropes determined in that specific environment.La cantidad de polvo depositado en la superficie de un panel depende de los parámetros ambientales. Estos son de naturaleza aleatoria (ej. humedad, velocidad del viento y temperatura ambiente) lo que dificulta su modelamiento teórico. El presente trabajo describe el efecto del polvo calculando el factor de reducción (ηpolvo) y modelando su dependencia en el tiempo. Para lograr esto, se llevó una campaña experimental en tres strings tándem (a-Si / µc-Si) de 1.15 kW ubicados en la cuidad de Lima, dividida en dos periodos de tiempo. El primer periodo, del 15.07.2016 al 04.07.2017, los tres string se limpiaron dos veces semanalmente. La potencia nominal fue calculada para los días con cielo despejado. Se encontró que entre cada string existen ligeras diferencias o mismatch en la potencia nominal, lo que se consideró estimar un factor de corrección (k) con el propósito de reajustar la potencia de salida. En la segunda etapa del 05.07.2017 al 05.07.2018, se dejó que el polvo se deposite de manera natural, estudiando el efecto del polvo en la caída energética mediante el factor de reducción. Comprender este factor será de importancia para las operaciones de mantenimiento de los strings ubicados en ese entorno especifico.Universidad Nacional de Ingeniería2020-05-09info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://revistas.uni.edu.pe/index.php/tecnia/article/view/83210.21754/tecnia.v30i1.832TECNIA; Vol. 30 No. 1 (2020); 27-33TECNIA; Vol. 30 Núm. 1 (2020); 27-332309-04130375-776510.21754/tecnia.v30i1reponame:Revistas - Universidad Nacional de Ingenieríainstname:Universidad Nacional de Ingenieríainstacron:UNIspahttps://revistas.uni.edu.pe/index.php/tecnia/article/view/832/1312info:eu-repo/semantics/openAccessoai:oai:revistas.uni.edu.pe:article/8322023-08-04T17:16:37Z
dc.title.none.fl_str_mv Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy
Estudio del efecto del polvo y estimación de la potencia nominal en un string fotovoltaico: Colaboración con el XXIII Simposio Peruano de Energía Solar
title Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy
spellingShingle Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy
Angulo Abanto, José Rubén
Sistema Fotovoltaicos
Deposición del polvo
Factor de Reducción
Photovoltaic System
Dust deposition
Reduction Factor
title_short Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy
title_full Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy
title_fullStr Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy
title_full_unstemmed Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy
title_sort Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy
dc.creator.none.fl_str_mv Angulo Abanto, José Rubén
Calsi Silva, Brando Xavier
Alfaro Collazos, Erick Felipe
Conde Mendoza, Luis Ángel
Muñoz Cerón, Emilio
Grieseler, Rolf
Guerra Torres, Jorge Andrés
Palomino Töfflinger, Jan Amaru
Espinoza Paredes, Rafael Leonardo
De la Casa Higueras, Juan
author Angulo Abanto, José Rubén
author_facet Angulo Abanto, José Rubén
Calsi Silva, Brando Xavier
Alfaro Collazos, Erick Felipe
Conde Mendoza, Luis Ángel
Muñoz Cerón, Emilio
Grieseler, Rolf
Guerra Torres, Jorge Andrés
Palomino Töfflinger, Jan Amaru
Espinoza Paredes, Rafael Leonardo
De la Casa Higueras, Juan
author_role author
author2 Calsi Silva, Brando Xavier
Alfaro Collazos, Erick Felipe
Conde Mendoza, Luis Ángel
Muñoz Cerón, Emilio
Grieseler, Rolf
Guerra Torres, Jorge Andrés
Palomino Töfflinger, Jan Amaru
Espinoza Paredes, Rafael Leonardo
De la Casa Higueras, Juan
author2_role author
author
author
author
author
author
author
author
author
dc.subject.none.fl_str_mv Sistema Fotovoltaicos
Deposición del polvo
Factor de Reducción
Photovoltaic System
Dust deposition
Reduction Factor
topic Sistema Fotovoltaicos
Deposición del polvo
Factor de Reducción
Photovoltaic System
Dust deposition
Reduction Factor
description The amount of dust deposited on the surface of a panel depends on the environmental parameters. These are random (eg. humidity, wind speed and ambient temperature) which makes it difficult to model them theoretically. This paper describes the effect of dust by calculating the derating factor (η_polvo) and modeling its dependence over time. To achieve this, an experimental campaign was carried out in three tandem (a-Si / µc-Si) of 1.15 kW controlled in the city of Lima, divided into two periods of time. In the first period, from 07.15.2016 to 04.07.2017, the three strings were cleaned twice per week. The nominal power was calculated for days with clear skies conditions. It was found that between each string there are slight differences or mismatches in the nominal power, which is considered to estimate a correction factor (k) in order to readjust the output power. In the second stage from 05.07.2017 to 05.07.2018, the powder was allowed to deposit naturally, studying the effect of the dust on the energy fall through the reduction factor. Understanding this factor will be of importance for the maintenance operations of the ropes determined in that specific environment.
publishDate 2020
dc.date.none.fl_str_mv 2020-05-09
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv https://revistas.uni.edu.pe/index.php/tecnia/article/view/832
10.21754/tecnia.v30i1.832
url https://revistas.uni.edu.pe/index.php/tecnia/article/view/832
identifier_str_mv 10.21754/tecnia.v30i1.832
dc.language.none.fl_str_mv spa
language spa
dc.relation.none.fl_str_mv https://revistas.uni.edu.pe/index.php/tecnia/article/view/832/1312
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidad Nacional de Ingeniería
publisher.none.fl_str_mv Universidad Nacional de Ingeniería
dc.source.none.fl_str_mv TECNIA; Vol. 30 No. 1 (2020); 27-33
TECNIA; Vol. 30 Núm. 1 (2020); 27-33
2309-0413
0375-7765
10.21754/tecnia.v30i1
reponame:Revistas - Universidad Nacional de Ingeniería
instname:Universidad Nacional de Ingeniería
instacron:UNI
instname_str Universidad Nacional de Ingeniería
instacron_str UNI
institution UNI
reponame_str Revistas - Universidad Nacional de Ingeniería
collection Revistas - Universidad Nacional de Ingeniería
repository.name.fl_str_mv
repository.mail.fl_str_mv
_version_ 1833562779269726208
score 13.888049
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).