Study of the dust effect and the nominal power estimation in a photovoltaic string: Collaboration with the XXIII Peruvian Symposium on Solar Energy
Descripción del Articulo
The amount of dust deposited on the surface of a panel depends on the environmental parameters. These are random (eg. humidity, wind speed and ambient temperature) which makes it difficult to model them theoretically. This paper describes the effect of dust by calculating the derating factor (η_polv...
Autores: | , , , , , , , , , |
---|---|
Formato: | artículo |
Fecha de Publicación: | 2020 |
Institución: | Universidad Nacional de Ingeniería |
Repositorio: | Revistas - Universidad Nacional de Ingeniería |
Lenguaje: | español |
OAI Identifier: | oai:oai:revistas.uni.edu.pe:article/832 |
Enlace del recurso: | https://revistas.uni.edu.pe/index.php/tecnia/article/view/832 |
Nivel de acceso: | acceso abierto |
Materia: | Sistema Fotovoltaicos Deposición del polvo Factor de Reducción Photovoltaic System Dust deposition Reduction Factor |
Sumario: | The amount of dust deposited on the surface of a panel depends on the environmental parameters. These are random (eg. humidity, wind speed and ambient temperature) which makes it difficult to model them theoretically. This paper describes the effect of dust by calculating the derating factor (η_polvo) and modeling its dependence over time. To achieve this, an experimental campaign was carried out in three tandem (a-Si / µc-Si) of 1.15 kW controlled in the city of Lima, divided into two periods of time. In the first period, from 07.15.2016 to 04.07.2017, the three strings were cleaned twice per week. The nominal power was calculated for days with clear skies conditions. It was found that between each string there are slight differences or mismatches in the nominal power, which is considered to estimate a correction factor (k) in order to readjust the output power. In the second stage from 05.07.2017 to 05.07.2018, the powder was allowed to deposit naturally, studying the effect of the dust on the energy fall through the reduction factor. Understanding this factor will be of importance for the maintenance operations of the ropes determined in that specific environment. |
---|
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).