Stabilization of Sandy Slopes with Vetiver Grass Using Experimental Method and Mathematical Model
Descripción del Articulo
This paper proposes the evaluation of the feasibility of a bioengineering geotechnical solution for the control of natural slope landslides caused by soil susceptibility, because of natural events or human action. The engineering solution with environmental considerations involves using the vetiver...
Autores: | , , |
---|---|
Formato: | artículo |
Fecha de Publicación: | 2024 |
Institución: | Universidad Peruana de Ciencias Aplicadas |
Repositorio: | UPC-Institucional |
Lenguaje: | inglés |
OAI Identifier: | oai:repositorioacademico.upc.edu.pe:10757/673579 |
Enlace del recurso: | http://hdl.handle.net/10757/673579 |
Nivel de acceso: | acceso embargado |
Materia: | Direct shear Mathematical model Safety factor Slope stability Vetiver |
Sumario: | This paper proposes the evaluation of the feasibility of a bioengineering geotechnical solution for the control of natural slope landslides caused by soil susceptibility, because of natural events or human action. The engineering solution with environmental considerations involves using the vetiver plant (Chrysopogon zizanioides) to stabilize the natural slope. The methodology applied was the identification of soil characteristics through soil mechanics laboratory tests, knowledge of vetiver grass and slope stability analysis considering the experimental method (EM) and mathematical model (MM). The shear strength parameters obtained in the experimental method consider the cohesion and friction angle resulting from the direct shear test, while the second method only considers the additional cohesion resulting from the mechanical effect provided by the vetiver roots. The results of the research report that, in the experimental method, the safety factor of the global stability presents a smaller increase as the root of the plant grows compared to the mathematical method. Finally, the values of the safety factors obtained from the slope stability analysis modeled in the SLIDE geotechnical software are higher than the minimum values established in the Peruvian EC regulations. 020 Stabilization of soils and slopes under static and pseudo-static conditions. |
---|
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).