Economic feasibility assessment of microgrids with renewable energy sources in Peruvian rural areas
Descripción del Articulo
Electrifcation of Peru's rural areas is an issue of vital importance for economic growth. However, these areas still have poor quality electricity service or operate in a stand-alone mode with high cost of energy. To address this problem, one of the most promising strategies proposes the use of...
Autores: | , , |
---|---|
Formato: | documento de trabajo |
Fecha de Publicación: | 2023 |
Institución: | Universidad Tecnológica del Perú |
Repositorio: | UTP-Institucional |
Lenguaje: | español |
OAI Identifier: | oai:repositorio.utp.edu.pe:20.500.12867/6543 |
Enlace del recurso: | https://hdl.handle.net/20.500.12867/6543 https://doi.org/10.1007/s10098-023-02463-w |
Nivel de acceso: | acceso abierto |
Materia: | Renewable energy Rural areas Electricity Energy distribution https://purl.org/pe-repo/ocde/ford#5.02.00 |
Sumario: | Electrifcation of Peru's rural areas is an issue of vital importance for economic growth. However, these areas still have poor quality electricity service or operate in a stand-alone mode with high cost of energy. To address this problem, one of the most promising strategies proposes the use of renewable energy technologies through the implementation of electrical microgrids (MGs). In this context, this research develops the analysis of 37 cases of rural villages throughout Peru in order to obtain the optimal MG design and the most feasible areas for its implementation, considering the associated costs, geographic location and load characteristics. For this purpose, an optimization process is carried out using HOMER Prosoftware with the aim of sizing the MG with the minimum net present cost and cost of energy. Then, an iterative process is developed in MATLAB software to map cost values, renewable contribution, emissions, the energy charge and the annual savings in the utility bill. This analysis considers fve scenarios base on a grid-connected MG (with sensitivity values of grid sellback price) and an of-grid MG system. The results show the geographic distribution of all the annual utility saving bill. For the grid-connected MG condition, it presents a proft in the range of $107.08 to $368.2 compared to loads connected to the grid; while for the of-grid MG condition, it presents a proft in the range of $1269 to $4976 in comparison with loads connected to a diesel generator. |
---|
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).