Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosas

Descripción del Articulo

In this research we identify the dangers and risk assessment of occupational safety and health based on the OHSAS 18001 at the “Taller de Cereales y Leguminosas” of the Agro-industrial Professional School of Engineering, Faculty of Agricultural Sciences of the National University of Trujillo. The me...

Descripción completa

Detalles Bibliográficos
Autor: Vásquez Urrunaga, Ivan Santos
Formato: tesis de grado
Fecha de Publicación:2015
Institución:Universidad Nacional de Trujillo
Repositorio:UNITRU-Tesis
Lenguaje:español
OAI Identifier:oai:dspace.unitru.edu.pe:20.500.14414/4334
Enlace del recurso:https://hdl.handle.net/20.500.14414/4334
Nivel de acceso:acceso abierto
Materia:Leguminosas, Cereales, Norma ohsas 18001:2007
id UNIT_3db4227554e02d66513ac22da56eef43
oai_identifier_str oai:dspace.unitru.edu.pe:20.500.14414/4334
network_acronym_str UNIT
network_name_str UNITRU-Tesis
repository_id_str 4801
dc.title.es_ES.fl_str_mv Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosas
title Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosas
spellingShingle Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosas
Vásquez Urrunaga, Ivan Santos
Leguminosas, Cereales, Norma ohsas 18001:2007
title_short Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosas
title_full Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosas
title_fullStr Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosas
title_full_unstemmed Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosas
title_sort Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosas
author Vásquez Urrunaga, Ivan Santos
author_facet Vásquez Urrunaga, Ivan Santos
author_role author
dc.contributor.advisor.fl_str_mv Siche Jara, Raúl Benito
dc.contributor.author.fl_str_mv Vásquez Urrunaga, Ivan Santos
dc.subject.es_ES.fl_str_mv Leguminosas, Cereales, Norma ohsas 18001:2007
topic Leguminosas, Cereales, Norma ohsas 18001:2007
description In this research we identify the dangers and risk assessment of occupational safety and health based on the OHSAS 18001 at the “Taller de Cereales y Leguminosas” of the Agro-industrial Professional School of Engineering, Faculty of Agricultural Sciences of the National University of Trujillo. The methodology used for the preparation of the IPER was the Generalized Methodology, where the analysis applies to two determining factors: (a) Probability and (b) Severity. The result of this analysis determined that the most significant risks belong to the stages of: kneading, cutting the dough, baking, beaten and the adding of products.
publishDate 2015
dc.date.accessioned.none.fl_str_mv 2016-11-03T01:25:02Z
dc.date.available.none.fl_str_mv 2016-11-03T01:25:02Z
dc.date.issued.fl_str_mv 2015
dc.type.es_ES.fl_str_mv info:eu-repo/semantics/bachelorThesis
format bachelorThesis
dc.identifier.uri.none.fl_str_mv https://hdl.handle.net/20.500.14414/4334
url https://hdl.handle.net/20.500.14414/4334
dc.language.iso.es_ES.fl_str_mv spa
language spa
dc.relation.ispartof.fl_str_mv SUNEDU
dc.relation.ispartofseries.none.fl_str_mv TAGI/427/2015;
dc.rights.es_ES.fl_str_mv info:eu-repo/semantics/openAccess
dc.rights.uri.none.fl_str_mv http://creativecommons.org/licenses/by-nc-nd/2.5/pe/
eu_rights_str_mv openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-nd/2.5/pe/
dc.publisher.es_ES.fl_str_mv Universidad Nacional de Trujillo
dc.source.es_ES.fl_str_mv Universidad Nacional de Trujillo
Repositorio institucional - UNITRU
dc.source.none.fl_str_mv reponame:UNITRU-Tesis
instname:Universidad Nacional de Trujillo
instacron:UNITRU
instname_str Universidad Nacional de Trujillo
instacron_str UNITRU
institution UNITRU
reponame_str UNITRU-Tesis
collection UNITRU-Tesis
bitstream.url.fl_str_mv https://dspace.unitru.edu.pe/bitstreams/550113bd-89be-49b7-b38b-bb8838547085/download
https://dspace.unitru.edu.pe/bitstreams/1775d66d-fce4-486a-9d00-d91953872cd7/download
bitstream.checksum.fl_str_mv 8a4605be74aa9ea9d79846c1fba20a33
825ca1e6a97f818a3ea45dbab208c189
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
repository.name.fl_str_mv Repositorio Institucional - UNITRU
repository.mail.fl_str_mv repositorios@unitru.edu.pe
_version_ 1807290099310788608
spelling Siche Jara, Raúl BenitoVásquez Urrunaga, Ivan Santos2016-11-03T01:25:02Z2016-11-03T01:25:02Z2015https://hdl.handle.net/20.500.14414/4334In this research we identify the dangers and risk assessment of occupational safety and health based on the OHSAS 18001 at the “Taller de Cereales y Leguminosas” of the Agro-industrial Professional School of Engineering, Faculty of Agricultural Sciences of the National University of Trujillo. The methodology used for the preparation of the IPER was the Generalized Methodology, where the analysis applies to two determining factors: (a) Probability and (b) Severity. The result of this analysis determined that the most significant risks belong to the stages of: kneading, cutting the dough, baking, beaten and the adding of products.En el presente trabajo de investigación se realizó la identificación de peligros y evaluación de riesgos de seguridad y salud ocupacional basados en la norma OHSAS 18001 en el Taller de cereales y leguminosas de la Escuela Profesional de Ingeniería Agroindustrial, Facultad de Ciencias Agropecuarias de la Universidad Nacional de Trujillo. La metodología utilizada para la elaboración del IPER fue la Metodología Generalizada, en donde se aplica el análisis de dos factores determinantes: (a) Probabilidad y (b) Severidad. Resultado de este análisis se determinó que los riesgos más significativos pertenecen a las etapas de: amasado, cortado de la masa, horneado, batido y corte para adición de productos.spaUniversidad Nacional de TrujilloTAGI/427/2015;SUNEDUinfo:eu-repo/semantics/openAccesshttp://creativecommons.org/licenses/by-nc-nd/2.5/pe/Universidad Nacional de TrujilloRepositorio institucional - UNITRUreponame:UNITRU-Tesisinstname:Universidad Nacional de Trujilloinstacron:UNITRULeguminosas, Cereales, Norma ohsas 18001:2007Identificacion de peligros y evaluacion de riesgos según la norma ohsas 18001:2007 en el taller de cereales y leguminosasinfo:eu-repo/semantics/bachelorThesisTítulo ProfesionalIngeniero AgroindustrialIngeniería AgroindustrialUniversidad Nacional de Trujillo.Facultad de Ciencias AgropecuariasLICENSElicense.txtlicense.txttext/plain; charset=utf-81748https://dspace.unitru.edu.pe/bitstreams/550113bd-89be-49b7-b38b-bb8838547085/download8a4605be74aa9ea9d79846c1fba20a33MD52ORIGINALVASQUEZ URRUNAGA IVAN SANTOS.pdfVASQUEZ URRUNAGA IVAN SANTOS.pdfapplication/pdf1225658https://dspace.unitru.edu.pe/bitstreams/1775d66d-fce4-486a-9d00-d91953872cd7/download825ca1e6a97f818a3ea45dbab208c189MD5320.500.14414/4334oai:dspace.unitru.edu.pe:20.500.14414/43342024-02-13 14:49:21.76http://creativecommons.org/licenses/by-nc-nd/2.5/pe/info:eu-repo/semantics/openAccessopen.accesshttps://dspace.unitru.edu.peRepositorio Institucional - UNITRUrepositorios@unitru.edu.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
score 13.906105
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).