Estudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosus

Descripción del Articulo

In this research, the influence of the percentage by weight of cellulose and glycerin on the tensile strength, strain and stiffness of biofilms based on modified starch from the seed of Persea amerinaca Mill (avocado seed) was evaluated. Starch and cellulose were extracted by wet method and treatmen...

Descripción completa

Detalles Bibliográficos
Autores: Avalos Barreto, Diego Armando, Guevara Parimango, Jans Carlos
Formato: tesis de grado
Fecha de Publicación:2023
Institución:Universidad Nacional de Trujillo
Repositorio:UNITRU-Tesis
Lenguaje:español
OAI Identifier:oai:dspace.unitru.edu.pe:20.500.14414/18336
Enlace del recurso:https://hdl.handle.net/20.500.14414/18336
Nivel de acceso:acceso abierto
Materia:Resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón
id UNIT_0c8b341fb7b1294b64026186db261607
oai_identifier_str oai:dspace.unitru.edu.pe:20.500.14414/18336
network_acronym_str UNIT
network_name_str UNITRU-Tesis
repository_id_str 4801
dc.title.es_PE.fl_str_mv Estudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosus
title Estudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosus
spellingShingle Estudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosus
Avalos Barreto, Diego Armando
Resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón
title_short Estudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosus
title_full Estudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosus
title_fullStr Estudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosus
title_full_unstemmed Estudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosus
title_sort Estudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosus
author Avalos Barreto, Diego Armando
author_facet Avalos Barreto, Diego Armando
Guevara Parimango, Jans Carlos
author_role author
author2 Guevara Parimango, Jans Carlos
author2_role author
dc.contributor.advisor.fl_str_mv Chávez Novoa, Danny Mesías
dc.contributor.author.fl_str_mv Avalos Barreto, Diego Armando
Guevara Parimango, Jans Carlos
dc.subject.es_PE.fl_str_mv Resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón
topic Resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón
description In this research, the influence of the percentage by weight of cellulose and glycerin on the tensile strength, strain and stiffness of biofilms based on modified starch from the seed of Persea amerinaca Mill (avocado seed) was evaluated. Starch and cellulose were extracted by wet method and treatments (alkaline and acid) respectively. Biofilms were obtained by the solution fusion method. The percentages by weight of cellulose, as reinforcement, were 45, 50 and 55%; and glycerin, as a plasticizer, were 20, 25 and 30%; these dosages were used in the preparation of biofilms. For the tensile test, the guidelines of the ASTM D882- 12 standard were followed. The biofilms reached maximum tensile strength and stiffness values of 12.10 MPa and 54.05 MPa respectively; when the films were reinforced with 55% cellulose and plasticized with 20% glycerin; On the other hand, minimum tensile strength values of 7.15 MPa were obtained, when reinforced with 45% cellulose and plasticized with 30% glycerin, on the other hand, a minimum rigidity of 18.64 MPa was obtained, when reinforced with 50 % cellulose and plasticized with 25% glycerin. Regarding the maximum percentage strain was 42.64%, when it was reinforced with 50% cellulose and plasticized with 25% glycerin, on the other hand, the minimum percentage deformation was 21.95%, when it was reinforced with 45% cellulose and plasticized. with 20% glycerin. It has been concluded that biofilms, as the percentage by weight of cellulose increases up to 55%, the average values of tensile strength and stiffness increase, on the contrary, as the percentage by weight of glycerin increases up to a 25% tensile strength and stiffness decrease; regarding the percentage deformation the biofilms presented an inverse effect. This study aimed on expanding research on biofilms used as biodegradable packaging for the preservation of fruits, vegetables, and meats
publishDate 2023
dc.date.accessioned.none.fl_str_mv 7/7/2023 13:35
dc.date.available.none.fl_str_mv 7/7/2023 13:35
dc.date.issued.fl_str_mv 2023-07
dc.type.es_PE.fl_str_mv info:eu-repo/semantics/bachelorThesis
format bachelorThesis
dc.identifier.uri.none.fl_str_mv https://hdl.handle.net/20.500.14414/18336
url https://hdl.handle.net/20.500.14414/18336
dc.language.iso.es_PE.fl_str_mv spa
language spa
dc.relation.ispartof.fl_str_mv SUNEDU
dc.relation.ispartofseries.none.fl_str_mv Tmt;
dc.rights.es_PE.fl_str_mv info:eu-repo/semantics/openAccess
dc.rights.uri.es_PE.fl_str_mv https://creativecommons.org/licenses/by/2.5/pe/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/2.5/pe/
dc.publisher.es_PE.fl_str_mv Universidad Nacional de Trujillo
dc.source.es_PE.fl_str_mv Universidad Nacional de Trujillo
Repositorio Institucional
dc.source.none.fl_str_mv reponame:UNITRU-Tesis
instname:Universidad Nacional de Trujillo
instacron:UNITRU
instname_str Universidad Nacional de Trujillo
instacron_str UNITRU
institution UNITRU
reponame_str UNITRU-Tesis
collection UNITRU-Tesis
bitstream.url.fl_str_mv https://dspace.unitru.edu.pe/bitstreams/5cfa9ada-bb73-40ed-9874-d3912110ff70/download
https://dspace.unitru.edu.pe/bitstreams/8bd5d5ad-4305-4610-a88b-b0fffad40625/download
bitstream.checksum.fl_str_mv 4b84d390cd3605cfed15724a6d470a5d
8a4605be74aa9ea9d79846c1fba20a33
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
repository.name.fl_str_mv Repositorio Institucional - UNITRU
repository.mail.fl_str_mv repositorios@unitru.edu.pe
_version_ 1807290418090475520
spelling Chávez Novoa, Danny MesíasAvalos Barreto, Diego ArmandoGuevara Parimango, Jans Carlos7/7/2023 13:357/7/2023 13:352023-07https://hdl.handle.net/20.500.14414/18336In this research, the influence of the percentage by weight of cellulose and glycerin on the tensile strength, strain and stiffness of biofilms based on modified starch from the seed of Persea amerinaca Mill (avocado seed) was evaluated. Starch and cellulose were extracted by wet method and treatments (alkaline and acid) respectively. Biofilms were obtained by the solution fusion method. The percentages by weight of cellulose, as reinforcement, were 45, 50 and 55%; and glycerin, as a plasticizer, were 20, 25 and 30%; these dosages were used in the preparation of biofilms. For the tensile test, the guidelines of the ASTM D882- 12 standard were followed. The biofilms reached maximum tensile strength and stiffness values of 12.10 MPa and 54.05 MPa respectively; when the films were reinforced with 55% cellulose and plasticized with 20% glycerin; On the other hand, minimum tensile strength values of 7.15 MPa were obtained, when reinforced with 45% cellulose and plasticized with 30% glycerin, on the other hand, a minimum rigidity of 18.64 MPa was obtained, when reinforced with 50 % cellulose and plasticized with 25% glycerin. Regarding the maximum percentage strain was 42.64%, when it was reinforced with 50% cellulose and plasticized with 25% glycerin, on the other hand, the minimum percentage deformation was 21.95%, when it was reinforced with 45% cellulose and plasticized. with 20% glycerin. It has been concluded that biofilms, as the percentage by weight of cellulose increases up to 55%, the average values of tensile strength and stiffness increase, on the contrary, as the percentage by weight of glycerin increases up to a 25% tensile strength and stiffness decrease; regarding the percentage deformation the biofilms presented an inverse effect. This study aimed on expanding research on biofilms used as biodegradable packaging for the preservation of fruits, vegetables, and meatsEn esta investigación se evaluó la influencia del porcentaje en peso de celulosa y glicerina sobre la resistencia a la tracción, la deformación y rigidez de biopelículas a base de almidón modificado de semilla de Persea americana Mill (pepa de palta). El almidón y la celulosa se extrajeron mediante vía húmeda y tratamientos (alcalinos y ácido) respectivamente. Las biopelículas se obtuvieron mediante el método fusión en solución. Los porcentajes en peso de celulosa, como refuerzo fueron 45, 50 y 55 %; y la glicerina, como plastificante fueron 20, 25 y 30 %; estas dosificaciones se usaron en la elaboración de biopelículas. Para el ensayo de tracción se siguió los lineamientos de la norma ASTM D882-12. Las biopelículas alcanzaron valores máximos de resistencia a la tracción y rigidez de 12.10 MPa y 54.05 MPa respectivamente; cuando las películas se reforzaron con 55% de celulosa y se plastificaron con 20% de glicerina; en cambio, se obtuvo valores de resistencia a la tracción mínima de 7.15 MPa, cuando se reforzó con 45% de celulosa y se plastificó con 30% de glicerina, por otro lado se obtuvo una rigidez mínima de 18.64 MPa, cuando se reforzó con 50% de celulosa y se plastificó con 25% de glicerina. Con respecto a la deformación porcentual máxima fue de 42.64%, cuando se reforzó con 50% de celulosa y se plastificó con 25 % de glicerina, en cambio la deformación porcentual mínima fue 21.95%, cuando se reforzó con 45% de celulosa y se plastificó con 20% de glicerina. Se concluyó que las biopelículas, a medida que se aumenta el porcentaje en peso de celulosa hasta el 55% los valores promedio de resistencia a la tracción y rigidez aumentan, por lo contrario, a medida que se aumenta el porcentaje en peso de glicerina hasta un 25% la resistencia a la tracción y rigidez disminuyen; en cuanto a la deformación porcentual las biopelículas presentaron un efecto inverso. Este estudio tuvo como propósito ampliar la investigación sobre biopelículas utilizadas como empaques biodegradables para la conservación de frutas, verduras y carnes.TesisspaUniversidad Nacional de TrujilloTmt;SUNEDUinfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by/2.5/pe/Universidad Nacional de TrujilloRepositorio Institucionalreponame:UNITRU-Tesisinstname:Universidad Nacional de Trujilloinstacron:UNITRUResistencia a la tracción, la deformación, la rigidez, de biopelículas de almidónEstudio de la resistencia a la tracción, la deformación, la rigidez, de biopelículas de almidón de semilla de Persea americana Mill reforzadas con celulosa de la corona de Ananas comosusinfo:eu-repo/semantics/bachelorThesisTítulo ProfesionalIngeniero de MaterialesIngenieríaUniversidad Nacional de Trujillo Escuela de Ingeniería de MaterialesORIGINALAvalos Barreto y Guevara Parimango.pdfAvalos Barreto y Guevara Parimango.pdfResistencia a la tracción, la deformación, la rigidez, de biopelículas de almidónapplication/pdf578115https://dspace.unitru.edu.pe/bitstreams/5cfa9ada-bb73-40ed-9874-d3912110ff70/download4b84d390cd3605cfed15724a6d470a5dMD51LICENSElicense.txtlicense.txttext/plain; charset=utf-81748https://dspace.unitru.edu.pe/bitstreams/8bd5d5ad-4305-4610-a88b-b0fffad40625/download8a4605be74aa9ea9d79846c1fba20a33MD5220.500.14414/18336oai:dspace.unitru.edu.pe:20.500.14414/183362024-04-21 13:04:17.333https://creativecommons.org/licenses/by/2.5/pe/info:eu-repo/semantics/openAccessopen.accesshttps://dspace.unitru.edu.peRepositorio Institucional - UNITRUrepositorios@unitru.edu.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
score 13.932078
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).