Neutronic calculation of safety parameters for the RP-0 and RP-10 nuclear reactors

• Autores: Lázaro, Gerardo, Deen, James R., Woodruff, William L.
• Formato: artículo
• Fecha de Publicación: 2002
• Institución: Instituto Peruano de Energía Nuclear
• Repositorio: IPEN-Institucional
• Lenguaje: inglés
• OAI Identifier: oai:repositorio.ipen.gob.pe:20.500.13054/168
• Enlace del recurso: https://hdl.handle.net/20.500.13054/168
• Nivel de acceso: acceso abierto
• Materia: Reactor RP-10; Reactor RP-0; Análisis de seguridad; Cálculos por ordenadores; Método de Monte Carlo

Theoretical safety calculations were done with proved codes utilized by the staff of the RERTR program in the HEU to LEU core conversions. The studies were designed to evaluate the reactivity coefficients and kinetics parameters of the reactor involved in the evolution of peak power transients by reactivity insertion accidents. It was done to show the trend of these reactivity coefficients as a function of the core size and fuel depletion for RP10 cores. It was useful to get a better understanding of the progression of the reactivity insertion transients monitoring the critical thermal hydraulic parameters to avoid core damage. To confirm the accuracy of these studies the results were compared with experimental data of the SPERT I reactors. The microscopic cross section calculations were condensed to 15 broad groups using the WIMSD4M[1] code for all the isotopes from eight different regions that model seven different assemblies. The Supercell, multiplate and homogenized options were used to represent the different assemblies in the reactor. For diffusion theory calculations the DIF3D[2] code was used in planar geometry with input axial buckling to simulate axial leakage. To Benchmark the designed models used in the cross sections generation and the DIF3D designed model, the VIM[3] Monte Carlo code was used. The RECOEFF[4] code was used to calculate the reactivity coefficients.