Design of a parabolic patch antenna in band L, with double layer and air substrate, for weather satellite reception
Descripción del Articulo
This paper presents the design of a parabolic patch antenna. The reflector of primary focus has 120cm of diameter, the proposed feeder has double layer and air substrate between its layers. The upper and lower square layers are supported by non-conductive material. The experimental axial ratio obtai...
Autores: | , |
---|---|
Formato: | objeto de conferencia |
Fecha de Publicación: | 2017 |
Institución: | Consejo Nacional de Ciencia Tecnología e Innovación |
Repositorio: | CONCYTEC-Institucional |
Lenguaje: | inglés |
OAI Identifier: | oai:repositorio.concytec.gob.pe:20.500.12390/566 |
Enlace del recurso: | https://hdl.handle.net/20.500.12390/566 https://doi.org/10.1109/FGCT.2017.8103395 |
Nivel de acceso: | acceso abierto |
Materia: | Weather satellites Antennas Circular polarization Conductive materials Microstrip antennas Microwave antennas Orbits Receiving antennas Reflection Satellite antennas Satellites Slot antennas Air substrates Axial ratio https://purl.org/pe-repo/ocde/ford#1.05.09 |
Sumario: | This paper presents the design of a parabolic patch antenna. The reflector of primary focus has 120cm of diameter, the proposed feeder has double layer and air substrate between its layers. The upper and lower square layers are supported by non-conductive material. The experimental axial ratio obtained is 0.8dB at 1.7 GHz, phi=0deg. The gain obtained is 23.4dB, the reflection coefficient obtained in 1.7 GHz is -14dB. The antenna can be used to receive information from polar orbit weather satellites in L band, at 1.7 GHz. The antenna must be used with a rotor with synchronized movement in azimuth and elevation for the satellite tracking. |
---|
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).