Estudio de la cinética de osmodeshidratación aplicando vacío en aguaymanto (Physalis peruviana L.)

Descripción del Articulo

We studied the effect of temperature, osmotic concentration, acidity and vacuum pressure during the osmotic dehydration of Aguaymanto (Physalis peruviana L.). A syrup/fruit ratio of 4:1 was used during 180 minutes of the process making readings every 15 minutes. The variables studied significantly i...

Descripción completa

Detalles Bibliográficos
Autor: Chuquipoma Morales, José Daniel
Formato: tesis de grado
Fecha de Publicación:2018
Institución:Universidad Peruana Unión
Repositorio:UPEU-Tesis
Lenguaje:español
OAI Identifier:oai:repositorio.upeu.edu.pe:20.500.12840/1725
Enlace del recurso:http://repositorio.upeu.edu.pe/handle/20.500.12840/1725
Nivel de acceso:acceso abierto
Materia:Aguaymanto
Kinetic models
Osmotic dehydration
Water loss and solids gain
https://purl.org/pe-repo/ocde/ford#2.11.01
Descripción
Sumario:We studied the effect of temperature, osmotic concentration, acidity and vacuum pressure during the osmotic dehydration of Aguaymanto (Physalis peruviana L.). A syrup/fruit ratio of 4:1 was used during 180 minutes of the process making readings every 15 minutes. The variables studied significantly influenced moisture, water activity and b*. However, the soluble solids by effect of temperature, osmotic concentration and acidity; pH by effect of temperature and osmotic concentration; Acidity index by effect of temperature and acidity; L* by temperature and osmotic concentration; a* by effect of osmotic concentration. Three mathematical models were compared to describe the kinetics of water loss and the gain of solids at different temperatures (40, 50 and 60 °C), osmotic concentration (30, 40 and 50 °Brix), acidity (0.05, 0.075 and 0.1% citric acid) and vacuum pressure (200, 300 and 400 mmHg). Two empirical models were adjusted (Azuara and Peleg) and a phenomenological model from the solution of the second law of Fick. The results indicated that the model of Peleg adjusted better than the empirical model of Azuara and that to a lesser degree the phenomenological model of Fick, corroborated with the goodness of adjustment of the relative error mean percentage (ERM %) and the coefficient determination (R2). The highest water loss of 17.97 ± 2.23 % and the highest solid gain of 42 ± 3.06 °Brix were achieved under the following conditions; Temperature 60 °C, osmotic concentration 50 °Brix, acidity 0.075% and pressure 200 mmHg.
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).