Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru

Descripción del Articulo

In this work, we study an improved wood-burning stove with a water tank placed in the flue gas outlet for use as a heater. This system takes advantage of the waste heat of the gases that pass through the chimney to heat the water contained in the tank. The evaluations were carried out in a house loc...

Descripción completa

Detalles Bibliográficos
Autores: Soria L.S.G., Cabana-Hancco W.R., Montoya L.A., Palo-Tejada E.
Formato: artículo
Fecha de Publicación:2020
Institución:Consejo Nacional de Ciencia Tecnología e Innovación
Repositorio:CONCYTEC-Institucional
Lenguaje:inglés
OAI Identifier:oai:repositorio.concytec.gob.pe:20.500.12390/2588
Enlace del recurso:https://hdl.handle.net/20.500.12390/2588
https://doi.org/10.1088/1742-6596/1433/1/012005
Nivel de acceso:acceso abierto
Materia:General Physics and Astronomy
http://purl.org/pe-repo/ocde/ford#1.05.11
id CONC_6c8e54be8496f3365d476da19b004686
oai_identifier_str oai:repositorio.concytec.gob.pe:20.500.12390/2588
network_acronym_str CONC
network_name_str CONCYTEC-Institucional
repository_id_str 4689
dc.title.none.fl_str_mv Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru
title Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru
spellingShingle Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru
Soria L.S.G.
General Physics and Astronomy
http://purl.org/pe-repo/ocde/ford#1.05.11
title_short Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru
title_full Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru
title_fullStr Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru
title_full_unstemmed Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru
title_sort Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru
author Soria L.S.G.
author_facet Soria L.S.G.
Cabana-Hancco W.R.
Montoya L.A.
Palo-Tejada E.
author_role author
author2 Cabana-Hancco W.R.
Montoya L.A.
Palo-Tejada E.
author2_role author
author
author
dc.contributor.author.fl_str_mv Soria L.S.G.
Cabana-Hancco W.R.
Montoya L.A.
Palo-Tejada E.
dc.subject.none.fl_str_mv General Physics and Astronomy
topic General Physics and Astronomy
http://purl.org/pe-repo/ocde/ford#1.05.11
dc.subject.ocde.none.fl_str_mv http://purl.org/pe-repo/ocde/ford#1.05.11
description In this work, we study an improved wood-burning stove with a water tank placed in the flue gas outlet for use as a heater. This system takes advantage of the waste heat of the gases that pass through the chimney to heat the water contained in the tank. The evaluations were carried out in a house located in the district of San Antonio de Chuca (Imata), province of Caylloma, department of Arequipa, Peru, located above 4500m above sea level, where temperatures decrease to -20 °C during winter. A method is proposed to measure the power input of the integrated tank, which consists of finding the maximum power that the flue gas delivers to the water in the tank when the stove is turned on. Once this power has been identified, the wood-burning stove is replaced by an electric heating system that delivers the same power to heat the water. Once the electrical system has been calibrated, the water in the tank is heated to different temperatures, and the following are calculated: the accumulated energy, the time needed to reach the desired temperature and the amount of wood that would be used if the kitchen were used for heating. The power that the heater can deliver to the test house is thus determined. If the water in the tank is heated to 70 °C, this heating system can deliver an average power value of 450 W from 20:00 to 5:00 the next day. © Published under licence by IOP Publishing Ltd.
publishDate 2020
dc.date.accessioned.none.fl_str_mv 2024-05-30T23:13:38Z
dc.date.available.none.fl_str_mv 2024-05-30T23:13:38Z
dc.date.issued.fl_str_mv 2020
dc.type.none.fl_str_mv info:eu-repo/semantics/article
format article
dc.identifier.uri.none.fl_str_mv https://hdl.handle.net/20.500.12390/2588
dc.identifier.doi.none.fl_str_mv https://doi.org/10.1088/1742-6596/1433/1/012005
dc.identifier.scopus.none.fl_str_mv 2-s2.0-85078985645
url https://hdl.handle.net/20.500.12390/2588
https://doi.org/10.1088/1742-6596/1433/1/012005
identifier_str_mv 2-s2.0-85078985645
dc.language.iso.none.fl_str_mv eng
language eng
dc.relation.ispartof.none.fl_str_mv Journal of Physics: Conference Series
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
dc.rights.uri.none.fl_str_mv https://creativecommons.org/licenses/by/4.0/
eu_rights_str_mv openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/4.0/
dc.publisher.none.fl_str_mv Institute of Physics Publishing
publisher.none.fl_str_mv Institute of Physics Publishing
dc.source.none.fl_str_mv reponame:CONCYTEC-Institucional
instname:Consejo Nacional de Ciencia Tecnología e Innovación
instacron:CONCYTEC
instname_str Consejo Nacional de Ciencia Tecnología e Innovación
instacron_str CONCYTEC
institution CONCYTEC
reponame_str CONCYTEC-Institucional
collection CONCYTEC-Institucional
bitstream.url.fl_str_mv https://repositorio.concytec.gob.pe/bitstreams/b571e519-fb79-424d-b71c-008bba0b99e0/download
https://repositorio.concytec.gob.pe/bitstreams/7111327d-ffbc-474c-9dd0-129ad06081f2/download
https://repositorio.concytec.gob.pe/bitstreams/13c34329-14a7-4a8f-9e7c-06e03e9469ea/download
bitstream.checksum.fl_str_mv 86963d3cdccd999189c945b848cfaa19
4e50f057b2a6689aa6505b0f1284483a
4d5165b3c5c030e8a9a7c13f81bb4927
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv Repositorio Institucional CONCYTEC
repository.mail.fl_str_mv repositorio@concytec.gob.pe
_version_ 1844883008312573952
spelling Publicationrp06664600rp06663600rp06665600rp06666600Soria L.S.G.Cabana-Hancco W.R.Montoya L.A.Palo-Tejada E.2024-05-30T23:13:38Z2024-05-30T23:13:38Z2020https://hdl.handle.net/20.500.12390/2588https://doi.org/10.1088/1742-6596/1433/1/0120052-s2.0-85078985645In this work, we study an improved wood-burning stove with a water tank placed in the flue gas outlet for use as a heater. This system takes advantage of the waste heat of the gases that pass through the chimney to heat the water contained in the tank. The evaluations were carried out in a house located in the district of San Antonio de Chuca (Imata), province of Caylloma, department of Arequipa, Peru, located above 4500m above sea level, where temperatures decrease to -20 °C during winter. A method is proposed to measure the power input of the integrated tank, which consists of finding the maximum power that the flue gas delivers to the water in the tank when the stove is turned on. Once this power has been identified, the wood-burning stove is replaced by an electric heating system that delivers the same power to heat the water. Once the electrical system has been calibrated, the water in the tank is heated to different temperatures, and the following are calculated: the accumulated energy, the time needed to reach the desired temperature and the amount of wood that would be used if the kitchen were used for heating. The power that the heater can deliver to the test house is thus determined. If the water in the tank is heated to 70 °C, this heating system can deliver an average power value of 450 W from 20:00 to 5:00 the next day. © Published under licence by IOP Publishing Ltd.Consejo Nacional de Ciencia, Tecnología e Innovación Tecnológica - ConcytecengInstitute of Physics PublishingJournal of Physics: Conference Seriesinfo:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by/4.0/General Physics and Astronomyhttp://purl.org/pe-repo/ocde/ford#1.05.11-1Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peruinfo:eu-repo/semantics/articlereponame:CONCYTEC-Institucionalinstname:Consejo Nacional de Ciencia Tecnología e Innovacióninstacron:CONCYTECORIGINALEvaluation of an integrated wood-burning stove.pdfEvaluation of an integrated wood-burning stove.pdfapplication/pdf976830https://repositorio.concytec.gob.pe/bitstreams/b571e519-fb79-424d-b71c-008bba0b99e0/download86963d3cdccd999189c945b848cfaa19MD51TEXTEvaluation of an integrated wood-burning stove.pdf.txtEvaluation of an integrated wood-burning stove.pdf.txtExtracted texttext/plain19982https://repositorio.concytec.gob.pe/bitstreams/7111327d-ffbc-474c-9dd0-129ad06081f2/download4e50f057b2a6689aa6505b0f1284483aMD52THUMBNAILEvaluation of an integrated wood-burning stove.pdf.jpgEvaluation of an integrated wood-burning stove.pdf.jpgGenerated Thumbnailimage/jpeg5684https://repositorio.concytec.gob.pe/bitstreams/13c34329-14a7-4a8f-9e7c-06e03e9469ea/download4d5165b3c5c030e8a9a7c13f81bb4927MD5320.500.12390/2588oai:repositorio.concytec.gob.pe:20.500.12390/25882025-01-15 22:00:36.059https://creativecommons.org/licenses/by/4.0/info:eu-repo/semantics/openAccesshttp://purl.org/coar/access_right/c_abf2info:eu-repo/semantics/openAccessopen accesshttps://repositorio.concytec.gob.peRepositorio Institucional CONCYTECrepositorio@concytec.gob.pe#PLACEHOLDER_PARENT_METADATA_VALUE##PLACEHOLDER_PARENT_METADATA_VALUE##PLACEHOLDER_PARENT_METADATA_VALUE##PLACEHOLDER_PARENT_METADATA_VALUE#<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="a0fce091-1d13-408d-a542-594a08f929b5"> <Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type> <Language>eng</Language> <Title>Evaluation of an integrated wood-burning stove with water tank system for heating rural homes in the Andean highlands of Peru</Title> <PublishedIn> <Publication> <Title>Journal of Physics: Conference Series</Title> </Publication> </PublishedIn> <PublicationDate>2020</PublicationDate> <DOI>https://doi.org/10.1088/1742-6596/1433/1/012005</DOI> <SCP-Number>2-s2.0-85078985645</SCP-Number> <Authors> <Author> <DisplayName>Soria L.S.G.</DisplayName> <Person id="rp06664" /> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> <Author> <DisplayName>Cabana-Hancco W.R.</DisplayName> <Person id="rp06663" /> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> <Author> <DisplayName>Montoya L.A.</DisplayName> <Person id="rp06665" /> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> <Author> <DisplayName>Palo-Tejada E.</DisplayName> <Person id="rp06666" /> <Affiliation> <OrgUnit> </OrgUnit> </Affiliation> </Author> </Authors> <Editors> </Editors> <Publishers> <Publisher> <DisplayName>Institute of Physics Publishing</DisplayName> <OrgUnit /> </Publisher> </Publishers> <License>https://creativecommons.org/licenses/by/4.0/</License> <Keyword>General Physics and Astronomy</Keyword> <Abstract>In this work, we study an improved wood-burning stove with a water tank placed in the flue gas outlet for use as a heater. This system takes advantage of the waste heat of the gases that pass through the chimney to heat the water contained in the tank. The evaluations were carried out in a house located in the district of San Antonio de Chuca (Imata), province of Caylloma, department of Arequipa, Peru, located above 4500m above sea level, where temperatures decrease to -20 °C during winter. A method is proposed to measure the power input of the integrated tank, which consists of finding the maximum power that the flue gas delivers to the water in the tank when the stove is turned on. Once this power has been identified, the wood-burning stove is replaced by an electric heating system that delivers the same power to heat the water. Once the electrical system has been calibrated, the water in the tank is heated to different temperatures, and the following are calculated: the accumulated energy, the time needed to reach the desired temperature and the amount of wood that would be used if the kitchen were used for heating. The power that the heater can deliver to the test house is thus determined. If the water in the tank is heated to 70 °C, this heating system can deliver an average power value of 450 W from 20:00 to 5:00 the next day. © Published under licence by IOP Publishing Ltd.</Abstract> <Access xmlns="http://purl.org/coar/access_right" > </Access> </Publication> -1
score 13.466479
Nota importante:
La información contenida en este registro es de entera responsabilidad de la institución que gestiona el repositorio institucional donde esta contenido este documento o set de datos. El CONCYTEC no se hace responsable por los contenidos (publicaciones y/o datos) accesibles a través del Repositorio Nacional Digital de Ciencia, Tecnología e Innovación de Acceso Abierto (ALICIA).